Contico Manufacturing Product Catalogue By Type

Contico Floorpad Systems

Super Shine Diamond Floor Pad System

The innovative, quick and easy system to deep clean, polish and maintain hard floors.

 Super Shine Diamond Floor Pad System

The innovative, quick and easy system to deap clean, polish and maintain hard floors.

Transform dull, worn floors into a brilliant gleaming polished surface.

This remarkable new floor pad system is so quick and easy to deep clean, polish and maintain hard floors during normal cleaning hours, using normal equipment and existing staff - no specialist contractors are needed!

Innovative and versatile, you can achieve an amazing high-sheen finish that’s smooth, clean, gleaming, slip-resistant, safe and hygienic. Even dull, scratched and soiled floors can be transformed without the restoration headache.

Pads can be used wet or dry with all sizes and makes of auto scrubbers and high speed floor machines. The pad system uses state-of-the-art industrial diamonds as its cleaning/polishing medium.

The diamond sizes are carefully selected for each grade of pad to allow Terrazzo, Natural or Manufactured Stone and polished Concrete to be deep cleaned and then maintenance polished.

The biggest and most well used floors are no barrier!

Especially ideal for larger, high-traffic floors in supermarkets, hotels, hospitals, shopping centres, showrooms, schools, high-tech production plants, airports and public amenity areas. In fact any site where large floor areas need to be cleaned, polished and maintained to make a lasting impression with the minimum of disruption.

Environmentally friendly

This innovative floor pad system allows floors to be cleaned, polished and maintained naturally without the use of potentially harmful chemicals, polishing compounds and other toxic substances.

Remarkable labour and cost saving performance!

• A highly efficient system offering substantial saving in labour and energy costs on a daily, weekly and monthly basis.
• Extremely cost-effective with increased working lifetime using the same pads.
• Overcomes the need for expensive periodic maintenance.
• Achieves a more consistent finish on a wide variety of hard floor surfaces.
• 20mm thick pads for longer operating life.
• Open weave pad design for improved self-cleaning.
• Can be used wet or dry. Cleans deeper, particularly when used wet.
• Pad performance enhanced by increasing pressure and speed without affecting pad life.
• No harsh strippers, chemicals or expensive polishes.
• Allows greater airflow for better dust handling during dry use.
• Minimises heat build-up when dry burnishing at any speed to achieve a higher gloss finish.

Pad Usage

PAD 1 - COARSE
Use to wet clean the floor so that the dull soiled surface is transformed into a smooth clean floor.
This pad removes a thin layer from the surface, cleaning away chemical build-up, old floor finishes and ingrained dirt. Strips floor back to remove scoring, scratch marks and staining.

PAD 2 - MEDIUM
Slight imperfections will be removed to achieve a natural honed look. At this point the surface is starting to close to achieve a superb honed finish. Use dry.

PAD 3 - FINE
Produces a higher sheen to achieve a glowing lustre.
The polishing sequence is starting to leave a stunning semi-reflective finish. Easily achieved on a wide variety of hard floor finishes. Use dry.

PAD 4 - VERY FINE
Very quickly delivers a clear, reflective deep glossy shine. The ultimate glossy, first class finish. Also helps to retain good pore density and greater resistance to water and staining. Also use this pad as part of your daily cleaning programme to maintain the floor surface. Use dry.

Five passes at each step in the system, is normally sufficient before moving from one pad to the next!

For more information please click here.

Standard Speed Superpads

• Superpads can be use on both sides with no loss of efficiency.
• Supplied with 83mm centre hole punch-out plug for easy attachment to floor machines.
• Each pad has its own mix of fibres and abrasives for the specific floor maintenance task.
• Superpads are for use with floor machines of speeds from 175 to 350 rpm.
• Colour coded for easy identification.
• Open web design promotes self-cleaning, minimises loading on machinery and easier cleaning.
• Abrasive mixed with resin globules impregnated completely through the 25mm pad thickness.
• Tough and resilient synthetic fibres with heat resistant resin.
  

   Contico Superpads Black

  
  Aggressive, heavy duty pad for wet stripping only. Prepares floors for recoating, quickly and easily cuts through old finish, dirt and build-up. Conforms to uneven floors.
  
  

  Stripping - Heavy duty wet stripping

  
  
  

   Contico Superpads Brown

  
  Slightly less aggressive for dry stripping only. Quickly and easily cuts through wax and old finish, dirt and build-up. Conforms to uneven floors.
  
  

  Stripping - Fast, cuts away wax/old floor finish, dry stripping

  
  
  

   High Performance - Emerald II

  
  Maximum stripping performance to remove the heaviest finish and extensive dirt build-up.
  
  Tough and durable, our high / max stripping pads are highly abrasive to strip away layers of old wax and polish, even the toughest heel marks, ready to restore and maintain a fresh new surface.

  • For use with stripping solution.
  • Can be used on both sides with no loss of efficiency.
  • Supplied with centre hole punch-out plug for easy attachment to floor machines.
  • For use with floor machines at speeds 175 to 350 rpm.
  • Open web design is non-loading and coated on both sides for longer lasting wet and dry use.
  • Abrasive mixed with resin globules impregnated completely through the 14mm thick pad.
  • Tear resistant mix of synthetic fibres.

  
  
  

  Stripping - (High Performance)

  
  
  

   Contico Superpads Green

  
  Heavy duty scrubbing pad. Ideal for renovating worn or damaged floor finish, providing a fresh new surface ready for recoating. Removes dirt, spills and scuffs.
  
  

  Scrubbing - Heavy duty wet scrubbing. Removes surface coat, ground in dirt and scuff marks

  
  
  

   Contico Superpads Blue

  
  Moderate scrubbing or heavy wet spray cleaning of floors prior to burnishing and polishing. Excellent daily cleaning pad, minimal finish removal.
  
  

  Cleaning - Moderate scrubbing or heavy spray cleaning

  
  
  

   Contico Superpads Red

  
  Ideal for dry buffing, wet spray buffing and light duty scrubbing. Cleans when damp, buffs when dry. Quickly cleans and removes scuff marks while polishing floor to a high gloss.
  
  

  Buffing - Dry or spray to remove scuff marks and restore shine.

  
  
  

   Contico Superpads Soft Red

  
  Softer, less aggressive than Standard Red.
  
  For removal of scuff marks and and restoring high gloss finish.
  
  

  Buffing

  
  
  

   Contico Superpads Tan

  
  For polishing synthetic or natural finishes to a high lustre. Dry buff or wet spray buff, producing a beautiful glossy finish, while removing scuffs and black heel marks.
  
  

  Polishing - Dry polishing synthetic or natural finishes to high lustre.

  
  
  

   Contico Superpads White

  
  Non-aggressive polishing a clean dry floor, either dry buff or wet spray buff. Ideal for upgrading the final finish after scrubbing or spray buffing. Perfect for polishing soft waxes on hard floors. Removes scuffs and black heel marks and enhances floor appearance.
  
  

  Polishing - Non aggresive dry polishing to a high gloss.

  
  

  Ultra High-Speed Floor Pads

  Designed to produce and maintain a superb wet-look shine every time.
  
  Specially manufactured pads with varying degrees of aggressiveness to suit different types of floors and floor finishes. Specifically for use with high speed electric or battery operated floor machines with speeds from 1,000 to 3,000 rpm.
  • Ultra high speed pads can be used on both sides with no loss of efficiency.
  • Supplied with 83mm centre hole punch-out plug for easy attachment to floor machine.
  • Choice of 9 pads to suit varying floor finishes from soft buffable to medium durable or hard highly durable.
  • Colour coded for easy identification.
  • Resilient enough to conform to the floor surface for better coverage of speeds up-to 3,000 rpm.
  • Specially designed for buffing and burnishing, helping to prolong re-coating applications.
  • Engineered with fibres durable enough to clean and use again.
  • 25mm pad thickness. 14mm on natural coconut fibre floor pad.
  • Mixture of either synthetic fibres or with natural hair bound with resilient resin.
  

   Ultra-High Speed Floorpads - Coral

  
  Higher performance, longer lasting, daily floor maintenance and cleaning pad. Features new and improved resin binder technology and heavier denier fibres. Quickly removes black heel marks with less finish removal.
  
  

  Burnishing - Super soft pad that will kiss and polish the floor.

  
  
  

   Ultra-High Speed Floorpads - Beige

  
  A moderately soft pad perfect for removing scuffs and light scratches and renew the high gloss wet-look finish. Ideal for soft and medium floor finishes.
  
  

  Burnishing - Moderately soft pad for a softer finish.

  
  
  

   Ultra-High Speed Floorpads - Jackeroo

  
  A special blend of fibres including natural hair for more aggressive burnishing with the lubricating effect of a high hair content pad. Ideal for medium and hard highly durable floor finishes.
  
  

  Burnishing - Blend of natural hair and synthetic fibres with the lubricating effect of a hair pad.

  
  
  

   Ultra-High Speed Floorpads - Champagne

  
  Soft resin and fine synthetic fibres create a soft textured pad ideal for dry burnishing and buffing to an extra-high gloss. Ideal for medium and hard highly durable floor finishes.
  
  

  Burnishing - Soft-texture pad for dry burnishing and buffing for a high gloss.

  
  
  

   Ultra-High Speed Floorpads - Jackeroo Lite

  
  A lighter mix of natural hair to produce an exceptional high lustre finish, especially on soft and flexible surfaces. The special fibre mix produces a stunning shine quickly and easily.
  
  

  Burnishing - Natural hair pad, excels in bringing out the lustre on softer buffable floor finishes.

  
  
  

   Ultra-High Speed Floorpads - Buckeroo

  
  Very aggressive 100% natural hair to remove scuffs, heel marks and light scratches, leaving a fresh renewed gloss finish. Ideal for medium and hard highly durable floor finishes.
  
  

  Burnishing - Natural hair burnishing pad with binder that is hard and aggresive.

  
  
  

   Ultra-High Speed Floorpads - Peach

  
  Mildly aggressive wet spray buffing pad which revives gloss on dull floors in a single pass. 100% synthetic fibres works especially well when floors have a good hard finish.
  
  

  Buffing - Mildly aggresive spray buffing pad that is an excellent cleaner and polisher.

  
  
  

   Ultra-High Speed Floorpads - Blue Ice

  
  Medium soft ultra high speed pad delivering a deep gloss shine for a hand polished look. Use on floors with soft to medium finish.
  
  

  Burnishing - Medium-soft pad creates a super gloss shine to floors, for a hand polished look.

  
  
  

   Ultra-High Speed Floorpads - Natural Fibre

  
  Our most ECO friendly floor pad that delivers high gloss shine on floors with soft to medium finishes. Naturally lubricating fibres for improved burnishing effect. Organic and biodegradable.
  
  

  Burnishing